Waterproof and flame-retardant floor(WFR)
LV20038 MMGO floor professional China floor manufacturer fireproof
MGO flooring without PVC
MMgo flooring (WFR flooring)is a series of MGO with top melamine paper and balance paper to realize the same beauty and performance to
make your home fire proof, wear resistant, scratch resistant, and
PVC free.
A new generational Eco-friendly MGO flooring
1. Eco-friendly and recycling, E0 non-formaldehyde, non-plastic,
non-asbestos, hazardous substances free, without fiberglass mesh;
2. Waterproof and mold/fungus resistance: Does not support
mold/fungus growth and non-deformation;
3. Non-chloride, will not make the metal furniture and accessories
rusty;
4. High stability and high temperature resistance, suitable for
both of heat or cold pressing, also workable for geothermal
floor;
5. Class A1 fire rating, suitable for commercial zone;
6. Wear and scratch resistance, high bending strength, extra
locking system, easy install the same as SPC flooring;
MGO floor technical data:
| Size | 1225*200*8mm |
| Thickness | 8mm |
| Wear layer | AC4,AC5 |
| Install | Click system |
| Texture | Wood / Stone / Cement |
| Color | Optional |
| Certificates | ISO 9001,ISO14001 |
| Application | residential or commercial floor covering material. |
| Formaldehyde | ND |
| Surface Burning | Class A (ASTM E84) |
| Thickness Swell | ≤3% (tested after 24h soaked in the water) |
| Bending Strength | ≥20Mpa |
| Elasticity Modulus | ≥3500Mpa |
| Surface/Internal Bonding strength | ≥1.2Mpa |
The advantages of MGO flooring(WFR flooring):
1)Waterproof and Dampproof
As the main component of MGO flooring is MgSO4, it performs well
with water, and mildew will not happen with high humidity.
2)Fire Retardant
According to the authorities, 95% of the victims were burned in the
fire caused by the toxic fumes and gases. The fire rating of MGO
flooring is CLASS A1, which is non-combustible.
3)No Formaldehyde
MGO is high quality MgSO4, without harmful material such as
benzene, formaldehyde, heavy metal.
4)No Heavy Metal, No Lead Salt
The Stabilizer of MGO flooring is MgSO4, no lead salt heavy metal.
5) Dimensional Stable
Exposed to 80° heat, 6 hours---Shrinkage ≤ 0.1%; Curling ≤ 0.2mm
6) High Abrasion
MGO flooring has a transparent wear-resisting layer, whose
revolution is up and higher than 10000 turns.
7) Superfine Anti-slipping
MGO flooring has special skid resistance and wear-resisting layer
of the floor. Compared with common floor, it has higher friction
when it's wet.
8) Low requirement of sub-floor
Compared to traditional SPC, MGO flooring has a distinct advantage
because it is rigid core, which can hide many imperfections of
sub-floor.
| Mmgo Flooring Testing Data |
| Testing Item | MMGO(WFR) | Standard |
| Total THICKNESS (mm) | 8(without underlayment) | Optional IXPE, Cork available |
| Size (mm) | 1225*200*8 | Tailored size available |
| Utilization Class | Residential or Commercial | EN 13329 |
| Coating | aluminum oxide | |
| Embossing | EIR or Embossed | |
| Beveled | Four Sided Bevel | |
| Chemical resistance | Pass | ASTM F925-08 |
| Residual Indentation | <0.15% | ASTM F1914 |
| Dimensional Stability | <0.15% | EN434 |
| Wear Resistance | AC4 | EN 13329-06 |
| Antimicrobial | Yes | ASTM G21-96 |
| Fire proof | Class A S1 | ASTM E84-03 |
| Swelling | <2% | EN 13329-06 |
| Formaldehyde Emission | N/D | ASTM D6007 |
| Curling at 70C (1215mm length) | <2mm | Measure when planks are hot, no acclimation |
| Heat and Cold Resistance | <0.15% | ASTM F2199 |
| Sunshine test | no cupping or curling | 55 degree Celsius, 6 hours, measure when hot |
| Boiling water test | No peeling or distortion | 100C, 2 hours |
| Peeling Strength | Can not be peeled | |
| Lock Strength | > 5 kg/cm | ISO24334 |
| Resistance to impact | Big ball &small ball pass | EN 13329-06 |
| Caster chair (with underpad) | > 25000r | NALFA LF01 |
| Heavy Metal (8) | N/A | ASTM963-17 |
Any color of melamine décor paper can be used for Hmgo and Mmgo
flooring.
FAQ
Q: Are you a manufacturer or a trading company?
A: We are REAL manufacturer, providing OEM & ODM service of SPC
flooring and MGO flooring.Located in Chuzhou,Anhui, near Nanjing
port.
Q: How many years since your company start this business?
A: We began manufacturing flooring since the year 1998.
Q: Did your factory Register for export and import?
A: Yes. We applied full range of documents for exportation and
importation.
Q: Did your factory and products approved by any testing or
certification?
A: yes. We applied ISO 9001 and ISO 14001 quality certification,and
Ameican indoor air emission standard certification and so on
Q: May I apply to be one distributor or sole agent in our country
to sell your products?
A:Yes. This issue can be have a discussion.
Q: May I apply some free samples for testing before purchasing the
full range of production?
A: Yes. Provide free sanmple,but the postage needs to be paid at
your own expense.
Q: How to deal for sample order and regular order?
A:Regarding the sample order only can be arranged by fast express,
such as DHL UPS TNT and so on, samples are free, For the regular
order, normally we choose BY AIR or BY SEA, EXW, FOB all are
acceptable.
Q: How faster can you ship out the order?
A: For sample order normally within 3 days, regular order need to
negotiate before every delivery issue settle down.
Q: Can you provide us the best price?
A: Yes, each Item have differential pricing according to quantity
and current material cost and exchange rate.
Q: Can we visit your factory?
A: Yes, You are welcome to have a visit, you need to make an
appointment with us before your coming.
